“
Cutting Board Maintenance
Moisturize! Once a month I spend some quality time, just me and my cutting board family. Wood is porous and kind of alive—it expands and contracts, absorbs moisture and dries out. Without any TLC even the best wooden cutting board can crack, warp, or even rot from the inside. Luckily, all you need to prevent all of that is monthly moisturization.
1. Start with a clean and dry board: Using a soft dish sponge, scrub clean with dish soap. Remove any tough stains with a mixture of baking soda and water. Never use any harsh abrasives like bleach or steel wool. Rinse and then dry the board with a towel and leave it standing on its edge to fully dry. (If you can, it’s best to store your board standing on its edge when not in use so moisture doesn’t fester underneath.) When washing your board, be sure to wet both sides. This ensures that both sides are equally moist and dry at the same rate to prevent warping.
2. Apply a generous layer of food-grade mineral oil: Lay the board flat so excess oil doesn’t run off, and use your hands to spread a thick layer of mineral oil all over one side, rubbing into the edges and any grooves. Why mineral oil? Unlike most other oils, such as canola, olive, or coconut, mineral oil is totally flavorless and won’t grow rancid
3. Give it time to soak in: Let it sit for a few hours and preferably overnight to drink in as much oil as possible.
4. Buff and repeat: Use a towel to rub away any excess oil the board didn’t soak up. Next, buff the board, rubbing in any last remnants of oil. It should not feel slick or greasy when you’re done. Flip and repeat on the other side.
• Level up: To give your board an almost velvety feel, after oiling both sides, rub them down with board cream. Board cream is a mixture of food-grade mineral oil and beeswax that you can purchase or make yourself. Using a towel, rub a thin, even layer all over the board. No need to wipe it off after.
”
”