Instrument Technician Quotes

... In the discourse of today's financial backers of research, the only credible goal is power. Scientists, technicians, and instruments are purchased not to find truth, but to augment power.

The 'polymath' had already died out by the close of the eighteenth century, and in the following century intensive education replaced extensive, so that by the end of it the specialist had evolved. The consequence is that today everyone is a mere technician, even the artist...

Whoever pretends that a technician, an architect, a doctor, an engineer, or any type of scientist should merely work with the in­struments in his own specific field while his people starve to death or fall in battle, has in fact taken the side of the enemy. He is not apolitical, he is political-but in opposition to movements for lib­eration.

Here we have to acknowledge the fact that there were ages more fortunate than ours, those of Pythagoras and Aristoxenes, when our forefathers were satisfied with the fact that their purely tuned instruments were played only in some tones, because they were not troubled by doubts, for they knew that heavenly harmonies were the province of the gods. Later, all this was not enough, unhinged arrogance wished to take possession of all the harmonies of the gods. And it was done in its own way, technicians were charged with the solution, a Praetorius, a Salinas, and finally an Andreas Werckmeister, who resolved the difficulty by dividing the octave of the harmony of the gods, the twelve half-tones, into twelve equal parts.

Compare Chesterton’s view with Ratzinger’s: It is precisely woman who is paying the greatest price [for the sexual “revolution.”] … Woman, who is creative in the truest sense of the word by giving life, does not “produce,” however, in that technical sense which is the only one that is valued by a society more masculine than ever in its cult of efficiency. She is being convinced that the aim is to “liberate” her, “emancipate” her, by encouraging her to masculinize herself, thus bringing her into conformity with the culture of production and subjecting her to the control of the masculine society of technicians, of salesmen, of politicians who seek profit and power, organizing everything, marketing everything, instrumentalizing everything for their own ends.13

I believe that the clue to his mind is to be found in his unusual powers of continuous concentrated introspection. A case can be made out, as it also can with Descartes, for regarding him as an accomplished experimentalist. Nothing can be more charming than the tales of his mechanical contrivances when he was a boy. There are his telescopes and his optical experiments, These were essential accomplishments, part of his unequalled all-round technique, but not, I am sure, his peculiar gift, especially amongst his contemporaries. His peculiar gift was the power of holding continuously in his mind a purely mental problem until he had seen straight through it. I fancy his pre-eminence is due to his muscles of intuition being the strongest and most enduring with which a man has ever been gifted. Anyone who has ever attempted pure scientific or philosophical thought knows how one can hold a problem momentarily in one's mind and apply all one's powers of concentration to piercing through it, and how it will dissolve and escape and you find that what you are surveying is a blank. I believe that Newton could hold a problem in his mind for hours and days and weeks until it surrendered to him its secret. Then being a supreme mathematical technician he could dress it up, how you will, for purposes of exposition, but it was his intuition which was pre-eminently extraordinary - 'so happy in his conjectures', said De Morgan, 'as to seem to know more than he could possibly have any means of proving'. The proofs, for what they are worth, were, as I have said, dressed up afterwards - they were not the instrument of discovery.

By 1982, the synth had become so pervasive that it became the subject of a dispute initiated by the central London branch of the Musicians’ Union. When Barry Manilow toured the UK in January, he used synths to simulate the orchestral sounds of a big band, after which the union passed a motion to ban the use of synths, drum machines and any electronic devices ‘capable of recreating the sounds of conventional musical instruments’. They were particularly concerned about the possible effect on West End theatrical productions, imagining orchestra pits full of ‘technicians’ instead of musicians.

Not a direct quote, but referenced in the author's note at the end - Sister Elizabeth Kenny, was instrumental in developing a new method of treating polio. Barbara Johnson, a laboratory technician who was paralyzed with polio after a workplace accident but went on the work with Sabin as his statistician. Isabel Morgan vaccine successfully induced immunity in monkeys and was the basis of Jonas Salk's entry into the vaccine race. We'd be talking about the Morgan vaccine if she hadn't refused to test the vaccine on children. Elsie Ward perfected the technique for growing the virus outside a living body. Her technique allowed Salk's lab to make enough of the virus to put in the vaccines for millions of children. Whistleblower Bernice Eddy reported that test monkeys who got the vaccine from Cutter laboratories were developing polio, thus alerting officials that Cutter would be releasing unsafe vaccines for use. -- Her concerns were ignored and caused 200 children to acquire Polio through the vaccine. Many of the children were paralyzed. Some died. Federal regulations of vaccines was tightened because of this - and her. Eleanor Abbott invented the game Candy Land to amuse patients after she herself was hospitalized for the disease.

My friend Karen says that life is like a sound board. When music is mixed, the sound technician needs to adjust the levels to make the music sound its best. If one person or instrument needs to be really loud, everything else can’t be loud too because the board can’t handle it and, more importantly, the music won’t sound its best. The same is true in life. If one thing is dominating during a particular season, that’s okay, as long as adjustments are made to other areas. Without those adjustments to “reduce the volume,” distortion and chaos will result. But if you make those adjustments, your life song will bring the most beauty and pleasure possible in your life.

**Understanding the Importance of Oil temperature indicators ** The oil's temperature is one of the most important things to keep an eye on in the world of machinery and motors. Oil temperature indicators play a crucial role in this situation. The purpose of these instruments is to provide data on the oil temperature in real time, ensuring that machines operate within safe limits. These indicators are invaluable in a variety of industrial applications because overheating can result in catastrophic failures, compromised performance, and costly downtime. In mechanical systems, oil serves multiple purposes. It dissipates heat generated during operation, lubricates moving parts, and reduces wear and tear. However, oil can lose its effectiveness if it is heated beyond its ideal temperature range. Most of the time, this causes more wear and friction, which could lead to severe engine damage or failure. As a result, oil temperature indicators are very important tools for any operator or maintenance technician who wants to avoid overheating and the costs that come with it. A display unit, either analog or digital, and a sensor that measures the oil temperature are typically the components of an oil temperature indicator. It is possible to take immediate corrective action when temperatures reach unsafe levels thanks to advanced features like alarms found in many modern indicators. Depending on the application, oil temperature indicators may require different construction and installation methods. These indicators, for instance, need to be durable and able to withstand extreme conditions in high-performance engines. In a similar vein, efficient and long-lasting industrial machinery like turbines, compressors, and hydraulic systems require accurate temperature monitoring. Choosing the right type of oil temperature indicator for a particular application involves considering several factors, including the temperature range, the environment, and the type of oil used. Oil temperature indicators on a regular basis has the potential to significantly improve reliability and performance in industries like manufacturing, construction, and transportation that rely on machinery that runs continuously. By investing in quality oil temperature indicators and utilizing them effectively, companies can avert dangerous overheating scenarios. The readings of the indicators can be used to carry out routine maintenance, ensuring that the equipment runs smoothly and effectively. Oil temperature indicators can provide insight into the overall health of a mechanical system in addition to preventing overheating. Temperature swings that are out of the ordinary may indicate deeper issues that need to be addressed before they become more serious issues. For example, an unexpected rise in oil temperature could indicate a failing pump, an obstruction in the system, or that the oil has degraded and needs replacing. By effectively utilizing oil temperature indicators, operators and maintenance personnel can stay one step ahead of the competition. Regular training sessions on interpreting temperature data, understanding the warning signs, and implementing preventive measures can lead to safer and more efficient operations. In conclusion, Oil temperature indicators are not just accessories but essential tools for monitoring and managing the health of machinery and motors. They aid in the prevention of overheating, extend the service life of equipment, and ultimately save businesses money and time by providing crucial information about oil temperature. The significance of these indicators in preserving optimal performance cannot be overstated as machinery continues to evolve and operate under more demanding conditions.